9 May SikaGrout® 1. 1/4. C onstruction. SikaGrout® SikaGrout® High Strength shrinkage compensated cementitious grout. Product. Specialist Construction Supplies for Repair, Maintenance, Building & Infrastructure. Sikagrout Data Sheet. Specification notes. Product: Sikagrout SikaGrout DIVISION 3 – CONCRETE. Section – Grouts. Part 1 – General. Summary. A. This specification describes the grouting of cavities, voids.
|Published (Last):||24 January 2006|
|PDF File Size:||3.38 Mb|
|ePub File Size:||14.67 Mb|
|Price:||Free* [*Free Regsitration Required]|
Remove any excess water just prior to placing the grout.
SikaGrout – Everbuild
Remove affected person sikagrout 212 fresh air immediately and contact a physician. Collect sikagrout 212 appropriate container. Contact Sika for sikagrlut health and safety information. All surfaces should be brought to a saturated surface dry condition by presoaking with clean water for several hours before grouting. Water Requirements for SikaGrout Bolt holes must be blown clear of dust and other debris, and anchor bolts must be degreased with a suitable solvent such as Kwiklean water soluble solvent based sikagrout 212 compound.
Cured material can only be removed mechanically. The quantity of aggregate added should not exceed one 1 part of aggregate to one 1 part of Sika Grout by weight. Sikargout remove contaminated clothing. Wash hands immediately after use.
For voids up to mm it is necessary to fill Sika Grout with a suitable well graded aggregate ranging in size from 3 sikagrout 212 up to 15 mm. Concrete surfaces must be clean, sound and free from oil, grease, cement laitance sikagrout 212 all loosely adhering particles.
Wash clothing before re-use.
Remove uncured Sika Grout from tools and equipment with water. Mixing can be achieved either manually or mechanically.
Place the pre-determined quantity of Sika Grout directly into the sikagrout 212 hole. If the Sika Grout does not fill the annular gap evenly during bolt insertion, withdraw the bolt and insert additional Sika Grout and re-insert the bolt. The use of standard concrete curing techniques, such as light water sikagrout 212 for 72 hours or sikagrout 212 application of a suitable water based curing compound is recommended on all exposed surfaces of Sika Grout In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered.
Sika Grout can be used to fill sikagrout 212 up to mm in depth. Concrete grey when mixed.
Do not commence fogging until initial set has been reached. For external applications, protect from rain until initial set has been achieved. The expansive properties of Sika Grout will be severely reduced if heat is introduced to the mixed product via warm batching water, hot storage conditions sikagrout 212 Sika Groutand sikagrojt substrate and ambient temperatures.
Uncured material may be removed with water. Centre or locate the bolt in the desired position, using shims if necessary, and then leave undisturbed sikagrout 212 the Sika Grout has set.
Sikagrput Requirement per 25 kg bag in litres. Sikagrokt Grout is a one component, multi-purpose,freeflowing, expanding,cementitious grout. The correct quantity of Sika Grout required to completely fill the sikagrout 212 gap between the bolt and the sides of the hole should be determined before installation is attempted.
Push the anchor bolt into the hole and press it gently to the bottom, displacing the Sika Grout and filling the annulus around the bolt. Wash thoroughly with soap and water. The Company reserves itself the right to change the formulation of Sika products if so required by new research and development. For the structural grouting sikagroit Contains Portland cement and crystalline free silica. Mechanical mixing is preferred for quantities greater than sikagrout 212 bag. Mix for at sikagrout 212 3 minutes until a uniform, lump-free consistency is obtained.
Approximate Flow Distance in cm. All orders are accepted subject to our current terms of sale and delivery which are available sikagrout 212 request.